Vacuum Pumps, Air Compressors and Lab Utility Equipment

A two-stage, oil-free diaphragm pump range for rotary evaporation, filtration and vacuum concentration. Pumping speed runs from 18 to 50 L/min, ultimate vacuum from 20 to 250 mbar, and the wetted path is fluoroplastic with a PTFE-laminated diaphragm.

• 18–50 L/min pumping speed
• 20–250 mbar ultimate vacuum
• Oil-free two-stage diaphragm
• Fluoroplastic wetted parts
• 42–58 dB(A) noise level

A hotplate stirrer for general bench work, built for high temperature and corrosion resistance. Temperature is set and shown on an LCD, and an external sensor can report the actual sample temperature rather than the plate temperature. If the bar decouples, the unit finds and recaptures it; if the independent safety circuit trips, heating stops.

• High-temperature and corrosion-resistant construction
• Precise temperature control with LCD digital display
• External temperature sensor option for actual sample temperature
• Detects a lost stir bar and recaptures it automatically
• High explosion-proof safety rating
• Independent safety circuit stops heating above the safety temperature

A clean, dry air supply for instruments and sample-preparation accessories. The compressor drains itself and passes air through a built-in centrifugal drying system and an electronic water remover. A large stainless steel tank keeps pressure steady, and a box-type enclosure with wave-shaped acoustic foam keeps the unit quiet enough to sit in the laboratory.

• Automatic drainage with built-in centrifugal drying for clean, dry air
• Large-capacity stainless steel air tank for stable pressure
• Electronic water remover for thorough moisture removal
• Compact, lightweight and rust-resistant unit
• Complete compressor protection system
• Enclosed cabinet with wave-shaped acoustic foam for low noise
• Simple to operate and maintain

A cabinet that puts a quiet shell around a noisy pump. Wave-shaped foam with fine pores absorbs sound as air passes through, and the inlet and outlet are shaped to keep air moving through the box. Temperature is monitored and shown on an LED display, and casters let the whole assembly be rolled aside for maintenance.

• Wave-shaped acoustic foam absorbs sound across the cabinet
• Optimized inlet and outlet airflow for heat removal
• Real-time temperature monitoring with LED display
• Assembles easily from illustrated instructions
• Casters for moving the pump and servicing it

A heating instrument that works by radiation rather than through a hot plate surface. Near-infrared light heats the sample directly, with conduction as a secondary path, so temperature comes up quickly and evenly across the vessel. Power and temperature are both adjustable, and a timer lets the instrument run a set program.

• Near-infrared heating: radiation first, conduction second, for a fast ramp
• Even light distribution across every part of the sample
• Low power, fast heating
• Special surface treatment for corrosion resistance
• Adjustable heating power and temperature
• Timer-controlled operation

A filtration pump for large volumes and difficult liquids. High displacement gives it an advantage with heavy filter loads, viscous media and particle-rich samples, and a pointer gauge shows system vacuum while a knob sets it. The PTFE vacuum diaphragm is molded in one piece, with extra thickness for fatigue resistance.

• High displacement for large filtration volumes
• Suits high-viscosity and particle-rich media
• Pointer gauge shows system vacuum in real time
• Pressure knob adjusts vacuum to the method
• One-piece PTFE vacuum diaphragm, thick-walled and fatigue resistant
• Compact housing with low noise and low vibration
• Several vacuum levels available